Frequently asked questions
Short answers to questions that keep coming up when choosing accessories. For a specific roof, a salesperson will make the selection.
Membranes
Can a membrane serve as temporary roofing for a while?
No. It is laid together with the main roofing, so that UV radiation does not damage it. Fix the roofing as soon as possible after laying the membrane. Details are in the laying instructions.
What overlap should I make on the membrane?
It depends on the pitch of the slope: 10 cm at 36–90°, 15 cm at 25–35°, at least 20 cm below 25°. The overlap width is usually marked by the hatching on the membrane. It is recommended to bond the joints.
How much membrane does a roof need?
A roll is 1.5 m × 50 m, but part of the width goes into the overlap. Consumption always exceeds the roof area, by 20–200% depending on how complicated the roof is. The calculator will show the approximate number of rolls.
Which membrane should I choose for my roof?
The membrane is chosen to suit the roof layout and the pitch of the slope. The parameters are on the cards in the membrane category. For a specific roof a salesperson will choose it, write to us.
What do Sd and W1 mean on the membrane card?
Sd is the diffusion-equivalent air layer thickness: the lower the value, the more easily water vapour passes through the membrane. W1 is the water penetration resistance class. Do not confuse it with the W1 tape, which is used for bonding and repairing membranes.
Ridge and ventilation
Why ventilate a roof?
Water vapour passes through the membrane, and it is carried away by air flowing along the counter battens. Without this flow, moisture stays in the thermal insulation and the structure. The path of the air is described in the ventilation guide.
What is the difference between a comb and an eaves grille?
The comb protects the open space of the eaves from birds, rodents and insects, and its height is chosen to suit the roofing profile. The grille also stops birds, rodents and large insects, and in addition replaces an additional eaves batten. It is 25 mm high.
Which ridge roll for metal roof tiles?
Himavent is intended for roofs covered with metal roof tiles. The range also includes Himalayan Ridge and the aluminium tape. Each has a butyl strip and a 5 m roll.
Fixing
AR2 or AR0?
AR2 fixes the sheet to a timber structure. AR0 joins thin steel sheets in an overlap. The differences in heads and lengths are described in the screw guide.
Which socket for UFO screws?
UFO screws have a TORX® T20 socket, so the TORX® magnetic socket fits them.
What is a saddle washer for?
It is a washer under the screw head at the crest of trapezoidal sheet. The sizes are DK 25, 30, 35 and 41, also in RAL colours. Give the sheet profile and we will choose the size.
How do I order a profile filler?
Give the manufacturer and the profile name. The types for metal roof tiles and trapezoidal sheet are on the sealer card. We make profile fillers for profiles outside the list on request.
Snow and roof access
Snow guards or snow fences?
The cascade arrangement works best, that is, snow guards together with snow fences. The table in the guide shows what suits which roofing.
What should I fit on a standing seam roof?
For standing seam there are snow barriers with brackets. The aluminium tube is Ø30 mm and 3 m long, and for standing seam the double bracket HR091002 is used.
How many brackets for a snow fence?
The number of brackets is chosen to suit the roof angle and the snowfall in the region. For a specific roof ask a salesperson, write to us.
What is in the walkway board set?
The walkway board, two brackets, two cradles and a set of fixing screws. The board is 40 or 80 cm, and the bracket 350 or 400 mm. The set is for metal roof tiles; send enquiries about other roofing to a salesperson.
Orders and documents
What should I give in an enquiry?
The roofing type, the sheet manufacturer and the approximate roof area. We will choose matching products and give the price and availability. For a wholesaler or sheet manufacturer, a list of items with quantities is enough. Enquiry form.
Where can I find documents for a product?
If a product has a document, you will find it on the product page and in the Downloads section.
How do I read the product number?
HR numbers have four fields: warehouse, product, special features and colour. The meaning of the codes is given by the product key. It covers HR codes only.
Can't find your question here? Contact →
Next step
We will match the accessories to your roof
Give the roofing type, the sheet manufacturer and the approximate roof area.