Trapezoidal sheet: accessories in order of work

Accessories for a roof covered with trapezoidal sheet, one by one: from the roof timberwork to the touch-up paint. Where the catalogue has no item described for trapezoidal sheet, we select it on request.

Roof timberwork and membrane

The timber structure is joined with connectors from the timber connectors category and an HR 8,0xL timber screw. The 6.0 adjustment screw levels the battens. Under the trapezoidal sheet lies the membrane. It holds back condensate and wind-blown rain and snow, while letting water vapour pass outwards.

Eaves

The comb protects the open space of the eaves from birds, rodents and insects, and lets air through towards the ridge. The height of 55, 65, 80 or 100 mm is chosen to suit the sheet profile. The ventilation grille replaces an additional eaves batten. There are also profile fillers for the eaves flashing.

Roofing and fixing

The sheet is fixed to the timber structure with self-drilling roofing screws AR2 and AR2 UFO, and sheets are joined in an overlap with AR0 and AR0 UFO screws.

When the screw goes into the crest of the profile, you need a saddle washer, that is, a washer under the screw head. The sizes are DK 25, 30, 35 and 41, also in RAL colours. Give the sheet profile and we will choose the size.

For trapezoidal sheet there are 18 types of Info-GLOBAL profile fillers, including T18, T19, T35 and T55. To choose a profile filler, give the manufacturer and the profile name.

Chimney and roof penetrations

Rooflex tape seals the joint between roof and chimney and between roof and wall. Solar, PV and antenna cables leave through the roof slope in roof penetrations, and a soil vent terminal vents the soil stack. The bases of these elements are for T18 and T35 trapezoidal sheet. For another profile, ask about selection.

Ridge

Info-GLOBAL profile fillers are fitted beneath the ridge cap, including a type for the ridge T18 B KB. We select ridge roll and batten brackets for trapezoidal sheet on request.

Sealers for the ridge cap

Ventilation

Roof ventilation carries air from the eaves, along the counter battens, to the ridge. Ventilation ducts are led out through the roof slope with chimneys that have a T18 or T35 base. The roof slope vent has the same base.

Roof access and snow

The step and walkway board brackets in the catalogue are for metal roof tiles. We select roof access for trapezoidal sheet on request.

Snow guards and snow fences protect against snow. On trapezoidal sheet the snow fence is fixed with a universal flat bracket, and longer runs are joined with a connector. The cascade arrangement works best, that is, snow guards together with snow fences.

Touch-up

Scratches and chips from transport and installation are repaired with Info-GLOBAL touch-up paint. It is also worth using it to protect cut sheet edges.

You can work out the quantities roughly in the roof calculator. We will prepare a full list for a specific roof after your enquiry: give the sheet profile and manufacturer and the approximate roof area.

Read more

Next step

We will match the accessories to your roof

Give the roofing type, the sheet manufacturer and the approximate roof area.

Request a quote →