Roof timberwork and membrane
The timber structure is joined with connectors from the timber connectors category and an HR 8,0xL timber screw. The 6.0 adjustment screw levels the battens. Under the roofing lies the membrane, the underlay layer. It holds back condensate from under the sheet and wind-blown rain and snow, while letting water vapour pass outwards.
Membrane, tapes and roof timberwork
Eaves
At the eaves, air enters under the roofing. The comb lets it through and protects the eaves from birds, rodents and insects. The comb height, 55, 65, 80 or 100 mm, is chosen to suit the roofing profile. The ventilation grille replaces an additional eaves batten, and the mesh protects the eaves in the same way as the comb.
Eaves accessories
Roofing and fixing
The sheet is fixed to the timber structure with self-drilling roofing screws AR2 and AR2 UFO. Sheets are joined in an overlap with AR0 and AR0 UFO screws.
Info-GLOBAL profile fillers are matched to the shape of the roofing. For metal roof tiles there are eight types, and four more go under the ridge cap and eaves flashing. To choose a profile filler, give the manufacturer and the profile name.
Screws, sockets and sealers
Chimney and roof penetrations
The joint between the roofing and the chimney wall is one of the more difficult spots on the roof slope. Rooflex tape seals the joint between roof and chimney and between roof and wall.
Solar, PV and antenna cables leave through the roof slope in roof penetrations, and a soil vent terminal vents the soil stack. The bases of these elements are for metal roof tiles.
Chimney and roof penetrations
Ridge
The ridge roll is fixed on the ridge and hips, on roofing that has already been laid. Himavent is intended for roofs covered with metal roof tiles. The range also includes Himalayan Ridge with aluminium edges and an air-permeable centre, and an aluminium tape. The butyl strip bonds to smooth and porous surfaces, but the substrate must be free of grease and dust.
The ridge batten is held by BL and GW brackets or an adjustable bracket. They let you set the height of the batten and level it.
Ridge accessories
Ventilation
Roof ventilation carries air from the eaves, along the counter battens, to the ridge. Ventilation ducts are led out through the roof slope with chimneys, and the Ø200 chimney is used for mechanical ventilation and heat recovery. The roof slope vent ventilates the slope itself.
Chimneys and roof slope vent
Roof access and snow
On metal roof tiles you walk on steps and walkway boards fixed on BD brackets. Both elements are also available in ready-made sets.
Roof access
Snow on metal roof tiles is held by snow guards and snow fences. The snow fence is fixed with a type 350 or 400 bracket. Longer runs are joined with a connector. The cascade arrangement works best, that is, snow guards together with snow fences.
Snow guards
Touch-up
Scratches and chips from transport and installation are repaired with Info-GLOBAL touch-up paint. It is also worth using it to protect cut sheet edges. There is spray paint, a paint stick and a marker.
You can work out roughly how much of what you need in the roof calculator. We will prepare a full list for a specific roof after your enquiry: give the sheet manufacturer and the approximate roof area.














































